Clutch Master Replacement Clutch Kit Stages 1 - 7

Each Kit includes Friction Disk, Presure Plate, Throwout Bearing

Request which stage you would like
Stage 1
###-##-HD00

The FX100 System uses the Power Plus I Pressure Plate with a custom heavy-duty Steel Back Organic friction disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp NO2 upgrade, or other non-forced induction external bolt-ons. It features only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation.

Stage 2
###-##-HDKV

The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque holding capacity to the FX100, however, its life expectancy is increased 2-3 times with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer.

Stage 3:
###-##-HDTZ

The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement.
Stage 4
###-##-HDCB4 (Four Puck Disc)
###-##-HDCB6 (Six Puck Disc)

The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 or 6 wing (paddle) configuration, with the 4-wing being the more aggressive setup (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.

Warning: Due to the solid (no Marcel) friction rivet design, the FX400 disc engages very quickly and may chatter slightly in first and reverse. To help alleviate this problem, we only use premium ceramic friction material.

Stage 6 & Stage 7
FX600 > Bonded Organic Kevlar mix for the street
FX700 > Compressed Ceramic Bronze for the strip
Clutch Masters is proud to offer the finest and most economical multi-plate clutch systems, the FX600 and FX700 Series. Clutch Masters' Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous torque ratings, while retaining a very smooth operation. By using a smaller diameter clutch assembly, Clutch Masters Twin Disc systems have a reduced rotational mass, meaning quicker and smoother shifting and much better throttle response. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition's cast unit. They are available in three specific pressure ratings as well as several types of friction surfaces. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA.

Stage 3 shown in Picture. Flywheel sold seperately.


Fits 2002-2006 Cooper S R53
Fits 2005-2008 Cabrio S R52

Details


SKU	R53clutchmaster1
Shipping Cost	$20.00
Price:	$449.10

Options

Stage

Quantity

Add to cart

Add to wish list

Customer feedback

Product rating

Voting

Customer Reviews

There have been no reviews for this product.

News

Our Atlanta MINI shop is going very well as we have been very busy modding and maintaining MINIs. If you are planning on attending MINI's on the Dragon and want to get work done before or at the event we please ask that you schedule ASAP so we can be sure to fit everyone it. Thanks WAY

Previous news

Manufacturers

Special

Help

Clutch Master Replacement Clutch Kit Stages 1 - 7

Detailed images

Recommended products list

Customer feedback

Your cart

Authentication

Links

News