Photo Gallery
Shopping Cart
Contact Us

CALL US: 770-234-9965  
Due to issues with our phone service provider, you may be having trouble reaching us by phone.  
Please fill out our contact us form located here: Contact Us   
Can't find what you're looking for? Request it here.   
Search: Advanced search
Printable version 

Way Motor Works :: 02-06 Cooper S (R53) :: Performance :: Exhaust :: Megan Racing Header - Stainless Steel

Megan Racing Header - Stainless Steel

Megan Racing Header - Stainless Steel 
Megan racing headers are made with T-304 stainless steel, Mandrel bent tubing, CNC Machined Flanges. Each set is tested and dynoed to make sure the fitment and performance meet Megan Racings goal. Each header comes with 1 year warranty. Header comes complete with header and test pipe that is NOT a functioning catalytic converter. Note: Due to the removal of Catalyst, these headers like all Megan Headers are designated for Off-Road use only. A Check-Engine Light will be activated. But a Cat can be welded in using Megan flanges or used As it comes out of the box. Application:
2002-2006 R50/R53 Mini Cooper/Cooper S
2002-2008 R52 MINI Cabrio and Cabrio S
 - T-304 Stainless Steel Construction
- Direct Bolt-On Installation
- Eliminates Catalytic Converter
- Tuned to increase Mid-Range Torque and High-End Horsepower.


Fits 2002-2006 Cooper R50
Fits 2002-2006 Cooper S R53
Fits 2005-2006 JCW Hardtop R53
Fits 2005-2008 Cabrio R52
Fits 2005-2008 Cabrio S R52
Fits 2005-2008 JCW Cabrio R52
SKU MeganHeaderR53
Shipping Cost $39.00
Price: $199.95


Add to cart
Add to wish list


Related products

#17791 O2 Sensor Module

Customer feedback

Product rating

Product rating



Rate It!

Customer Reviews

Author: nick michael
Good product was impressed with the welds on this and the gauge of the stainless. Actually ended up quieter than the stock exhaust even with the test pipe. Did have a wierd rattle/squeal to it for first couple days, like a brake dragging just slighty. Went away when the exhaust finished settling in.

Author: Christopher Everett
Came with a simulator which wasnot expected.
Bolted right up. And so far have not had an issue with it.
Be aware you'll need to cut the sleeve at the wire harness to give your primary o2 sensor wire another 4 to 5 inches to use the stock O2 sensor. Outside of that.. Pretty solid



Your cart


Our Atlanta MINI shop is going very well as we have been very busy modding and maintaining MINIs. If you are planning on attending MINI's on the Dragon and want to get work done before or at the event we please ask that you schedule ASAP so we can be sure to fit everyone it. Thanks WAY

Previous news

Your email:

Copyright © 2005-2020 Way Motor Works Atlanta, GA