Home
Photo Gallery
Shopping Cart
Services
Directions
Contact Us

CALL US: 770-234-9965  
Due to issues with our phone service provider, you may be having trouble reaching us by phone.  
Please fill out our contact us form located here: Contact Us   
Can't find what you're looking for? Request it here.   
Search: Advanced search
 
Printable version 



Way Motor Works :: Maintenance :: WMW Stainless Turbo Oil Line Kit

WMW Stainless Turbo Oil Line Kit

WMW Stainless Turbo Oil Line Kit 
WMW Stainless Steel Oil Line Kit for Turbo MINI Cooper S R55 R56 R57 R58 R59 R60 R61. As these Turbo MINI's get older we are finding these lines are starting to leak. If yours are leaking this is a fire hazard as the oil can get on the hot exhaust and catch fire. Due to the amount of labor to replace one, we suggest replacing them both at the same time.
Our WMW Stainless Steel oil Line Kit replaces the OEM MINI oil line that has a small rubber oring seal on it. That seal over time and heat drys out and will leak. Our WMW line is an all steel banjo fitting with a taper brake line style seal, NO rubber. This will allow the line to not dry out and leak, and also hold more oil pressure.

Sold as a set including:
WMW Stainless Pressure oil line
OEM MINI Turbo oil return line
4 sealing washers

  31%

 
Fits 2007-2010 Cooper S R56
Fits 2008-2010 Clubman S R55
Fits 2009-2011 Cabrio S R57
Fits 2009-2014 JCW Hardtop R56
Fits 2009+ JCW Cabrio R57
Fits 2009-2014 JCW Clubman R55
Fits 2011-2014 Cooper S R56
Fits 2011-2014 Clubman S R55
Fits 2011+ Cabrio S R57
Fits 2011+ Countryman S R60
Fits 2013+ Paceman S R61
Fits 2012+ Coupe S R58
Fits 2012+ JCW Coupe R58
Fits 2012+ Roadster S R59
Fits 2012+ JCW Roadster R59
 
Details
 
SKU WMWssturboline
Shipping Cost $11.00
Price: $89.95

Options
 
Quantity

Add to cart
        
Add to wish list


 

Customer feedback

Product rating


Product rating

 

Voting

Rate It!


Customer Reviews


Author: gary caspelich
So far after 1000 miles no issues, took about 4 hours to install. Good jack stands a must as well as a racheting 10mm box wrench for the heat shield bolts. Also may want to put in service mode position but I was able to install and remove the downpipe not in service mode position. Factory banjo bolts are 17mm and the supplied are 19mm. I like the supplied banjo bolts as they have larger holes to feed more oil to the turbo.

 

 

Your cart




News


Our Atlanta MINI shop is going very well as we have been very busy modding and maintaining MINIs. If you are planning on attending MINI's on the Dragon and want to get work done before or at the event we please ask that you schedule ASAP so we can be sure to fit everyone it. Thanks WAY

Previous news



Copyright © 2005-2017 Way Motor Works Atlanta, GA